|
Whatever the application, Lubrication Engineers has the right grease
for the job: open gears, slides, pedestals, chassis points, seals,
couplings, chains, cables, pillow block bearings, automatic grease
systems, journal bearings.
Each one offers its own unique performance characteristics &
user benefits. Lubrication Engineers' greases offer the highest quality base
oils & additives.
If cost savings, reduced temperatures, less wear, water resistance,
impact resistance, seal friendliness, reliability, reduced down
time, quality & performance are important for your operation,
then one of the following Lubrication Engineers greases will deliver for you:
Chain & Cable
- 451
- 453 Wirelife™ ALMASOL® Coating Grease
Penetrates rapidly into chain; will not sling off easily. Tacky
& water resistant. Contains ALMASOL®, Lubrication Engineers' exclusive wear-reducing
additive. Excellent for gearboxes requiring semi-fluid grease.
Extreme Pressure
- 1299 ALMAPLEX® Ultra-Syn Lubricant
A full synthetic, specially formulated Aluminium Complex grease.
Made with a special blend of 100% synthetic based fluids. Excellent
performance under extreme operating conditions.
- 3750, 3751, 3752 ALMAGARD® Vari-Purpose Lubricant
Multi-functional, EP lubricant for extended service under extreme
conditions. Use in all types of vehicles, as well as many in-plant
applications.
- 1274 & 1275 ALMAPLEX® Industrial Lubricant
Excellent general purpose EP lubricant for industrial or fleet
use. Excellent for electric motors & can be used in central
lubrication systems.
- 4622 MONOLEC® Multiplex Lubricant
High quality, Lithium Complex grease that works well in plain
& anti-friction bearings. Excellent low temperature pumpability.
Perfect for use in industrial, fleet & automotive applications
calling for an EP grease.
- 4700, 4701, 4702 MONOLEC® Industrial Lubricant
Specialised products for centralised lubrication systems, where
a medium EP grease is used.
Food Grade
General Purpose
- 1232 ALMATEK® General Purpose
Lubricant
Highly versatile general purpose lubricant for friction &
anti-friction bearings, chassis points. Semi-tacky, resists wash
out, shock loading & pound out.
- 3750, 3751, 3752 ALMAGARD® Vari-Purpose Lubricant
Multi-functional, EP lubricant for extended service under extreme
conditions. Use in all types of vehicles, as well as many in-plant
applications.
- 1274 & 1275 ALMAPLEX® Industrial Lubricant
Excellent general purpose EP lubricant for industrial or fleet
use. Excellent for electric motors & can be used in central
lubrication systems.
- 4622 MONOLEC® Multiplex Lubricant
High quality, Lithium Complex grease that works well in plain
& anti-friction bearings. Excellent low temperature pumpability.
Perfect for use in industrial, fleet & automotive applications
calling for an EP grease.
- 4700, 4701, 4702 MONOLEC® Industrial Lubricant
Specialised products for centralised lubrication systems, where
a medium EP grease is used.
High Temperature
- 1250 & 1251 ALMASOL® High Temperature Lubricant
Recommended where a high temperature grease is required, such
as kiln car bearings, oven conveyors, asphalt plants, soot blowers
& similar applications.
- 1299 ALMAPLEX® Ultra-Syn Lubricant
A full synthetic, specially formulated Aluminium Complex grease.
Made with a special blend of 100% synthetic based fluids. Excellent
performance under extreme operating conditions.
-
2705 ALMASOL® Smokeless Chain Lubricant
Premium grade, high temperature chain lubricant contains
ALMASOL® and other submicron lubricating solids dispersed in a
special high temperature Food Grade synthetic carrier.
- 9102 SYNTEMP® Synthetic Lubricant
Aerosol lubricant for use on open gears, chains, cables, sprockets,
slides & dozens of other applications. Resists high temperatures,
won't run & melt.
- 9901 ALMASOL® SYNTEMP® Lubricant
High temperature EP synthetic grease. Recommended for high temperature
open gears, sliding surfaces & low speed plain bearings.
Open Gear
|
